Data Acquisition / Multimeter System User's Manual Section 8: Mixed function multi-
DAQ6510-900-01Rev. A / April 2018 8-7
Test results
The following procedure shows the results for this application.
1. Press the Menu key.
2. Under Views, select Reading Table.
3. Scroll the reading table noting both the measurements and labels in the Channel column of the
table.
Figure 42: DAQ6510 reading table mixed function multichannel scanning
To save the scanned measurements to a USB flash drive:
1. Select the MENU key.
2. Under the Measure column, choose Reading Buffers.
3. Insert a USB flash drive into the DAQ6510, select Save to USB.
4. Select the Change button adjacent to the Filename label, enter MixedScan using the dialog
provided.
5. Select OK.
To Next Page
Loading...
Need help?
General
