6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING
LOCAL SEEK
ON
:Searches only AM/ SW1/ SW2 stations with good
reception. ;
OFF
:Cancels.
•
Settings made are applicable only to the selected source/
station. Once you change the source/station, you need to
make the settings again.
AUTO MEMORY YES
:Automatically starts memorizing 6 stations with good
reception.;
NO
:Cancels.
•
Selectable only if [
NORMAL
] is selected for
[
PRESET TYPE
]. (
5
)
MONO SET ON
:Improves the FM reception, but the stereo effect may be
lost.;
OFF
:Cancels.
NEWS SET ON
: The unit will temporarily switch to News Programme if
available. ;
OFF
: Cancels.
REGIONAL ON
: Switches to another station only in the specific region
using the “AF” control.;
OFF
:Cancels.
AF SET ON
: Automatically searches for another station broadcasting
the same program in the same Radio Data System network
with better reception when the current reception is poor.;
OFF
:Cancels.
RADIO
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press on RC-406) to select
FM1/ FM2/ FM3/ AM/ SW1/ SW2.
3 Press (or press on RC-406) to search for a station.
• To change the searching method for : Press repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) (or press
one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access Tuning is
automatically canceled.
JS_KWD_DPX_5000BT_MN_EN_1.indd 6JS_KWD_DPX_5000BT_MN_EN_1.indd 6 30/10/2015 10:37:30 AM30/10/2015 10:37:30 AM