English
15
TV Control Function
3Selecting the Bands
Touch [ TV ] to select the band.
Each time you touch [ TV ], the band switches
between the TV1 and TV2.
3Selecting the Video Inputs
Each time you touch [ VD ], the video input switches
between the video 1 and video 2.
The video 1 will not select when the "IN-OUT" switch
is set to “OUT” (Page 32).
3Selecting the Channels
Auto Seek Tuning (AUTO1)
Touch [ ¢ ] to seek for channels up the band.
Touch [ 4 ] to seek for channels down the band.
Preset station Seek Tuning (AUTO2)
Touch [ ¢ ] to move to the next preset station (i.e.,
the one with the next highest number).
Touch [ 4 ] to move to the last preset station (i.e.,
the one with the next lowest number).
Manual Tuning (MANU)
Touch [ ¢ ] to increase the channel by one step.
Touch [ 4 ] to decrease the channel by one step.
3Station Preset Memory
Store the channel of the station currently being
listened to. You can then recall that station with a
single touch of a button.
Select the band/ station that you want to store.
Hold down preset station number [ P1 ] - [ P6 ] on
which you want to store the station, for two
seconds or more.
You can store 6 stations in each of the TV1 and TV2
bands.
3Recalling a Preset Station
Touch the preset station number [ P1 ] - [ P6 ] for the
desired station. The number of the recalled station is
displayed.
3Switching to the TV Control Screen
(Shift)
Touch [ ] to swicth the TV control screen (Shift).
3Switching to the Next Source Mode
Touch the mark located at the lower side of ∞
to switch to the next source control screen.
3Switching to the Previous Source Mode
Touch the mark located at the upper side of 5
to switch to the previous source control screen.
3Switching to the Menu Screen
Touch [ MENU ] to switch to the menu screen.
NOTE
2
1
NOTE
To Next Page
Loading...
Need help?
Monitor
Weight and Dimensions
