English
27
Name Set Function
3Station Name Preset (SNPS) /Disc Name
Preset (DNPS)
If the cursor is in the desired character input
position, go on to step 4. If not, touch either [ 2 ]or
[ 3 ] to move the cursor to the desired position.
Touching [ 2 ] moves the cursor to the left and
touching [ 3 ] moves it to the right.
Touch [ ∞ ] or [ 5 ] to switch the character lists.
When all characters are displayed on the character
list, [ ∞ ] and [ 5 ] do not appear.
Touch [ A B ], [ a b ], [ 1 2 ] or [ Ä ä ] to switch the
character lists.
Touch a character.
Continue steps 1 and 4 until all the characters have
been input for the name.
• You can enter up to 12 characters for each name.
• To enter a space, touch [ SPC ]. A blank is inserted
and the cursor moves to the right.
Touch [ OK ] to finish name entry and leave the
name preset mode.
• If you want to change the name of a station, first
display the name of the station (following step 1),
then change the letter(s) that you by following steps
2, and 4.
• You can assign names for up to 30 TV stations.
• You can only store names for up to 100 CDs. If you
store the name for an 101st CD, the first one will be
erased automatically.
• CDs are identified by their total length and number
of tracks. If you play another CD that happens to
have exactly the same specifications as another CD
whose name is stored, the wrong name may be
displayed.
NOTE
6
NOTE
5
4
3
NOTE
2
1
To Next Page
Loading...
Need help?
Monitor
Weight and Dimensions
