Kenwood PS Series User Manual

6-15 Remote Voltage Sensing Function
The remote voltage sensing function is designed to eliminate influences of
voltage drop, which is caused between the PS Series and a load by the
contact resistance and the resistance of the conductors connected to the load.
Even though voltage should drop by a maximum of 1 V per line between the PS
Series and a load within the rated voltage range, the PS Series outputs the
proper voltage through the main output terminal on the rear panel.
The description below assumes that the remote voltage sensing function is used
and all other operations are made on the front panel.
Si setting
Set switches 1 and 10 ON.
44
Use a shielded cabel or a pair of twisted wires.
PS Series
r
2
V
R
=Vo- (ri + r
2
) xlo
VO^VFS
Load
Main power output terminals
Vo : Output voltage of PS Series (V)
V
R
: Voltage applied to load (V)
ri = r
2
: Resistance of load connecting cable (Q)
Io : Output current of PS Series (A)
VFS : Rated voltage of PS Series (V)

Kenwood PS Series Specifications

General

Brand	Kenwood
Model	PS Series
Category	Power Supply
Language	English