8 KEY ASSIGNMENT
30 Index Contents Confidential FUNC (K)/Ver. 1.01
Home CH/GID
When the Home CH/GID key is
pressed, the transceiver jumps to the
configured Home CH/GID. (Refer to 2.7
Home CH/GID on page 10.)
Key Lock
When the Key Lock key is pressed, Key
Lock can be enabled or disabled. (Refer
to 1.9 Key Lock on page 5.)
Lamp
When the Lamp key is pressed, the
backlight LED lights. (Refer to 3.3 Lamp
on page 14.)
Low Transmit Power
When the Low Transmit Power key is
pressed, the transmit power can be
changed (High or Low).
Monitor
When the Monitor key is pressed, the
QT/DQT or Optional Signaling is reset.
(Refer to 16.5 Monitor on page 57.)
Monitor Momentary
When the Monitor Momentary key is
pressed and held, the QT/DQT or
Optional Signaling is reset.
(Refer to 16.5 Monitor on page 57.)
OST
When the OST key is pressed, OST can
be enabled or disabled. When the OST
key is pressed and held, the Encode/
Decode pair can be selected from the
OST List. (Refer to 17 OST on page
60.)
Scan
When the Scan key is pressed, the
transceiver starts or stops scanning.
(Refer to 21 Scan on page 105.)
Scan Delete/Add
When the Scan Delete/Add key is
pressed, the Zone-CH/GID can be
added to or removed from the Scan List.
(Refer to 21.6.1 Scan Delete/Add on
page 110.)
Scrambler
When the Scrambler key is pressed,
the Voice Scrambler function is enabled
or disabled. (Refer to 26 Voice
Scrambler on page 124.)
Selcall
The transceiver can make a Selcall
when the Selcall key is pressed and the
Fleet or ID number is directly entered.
(Refer to 20.2 Selcall Function on page
82.)
Selcall + Status
The transceiver can make a Selcall and
send a Status Message when the
Selcall + Status key is pressed and the
Fleet or ID number and Status number
are directly entered. (Refer to 20.2
Selcall Function on page 82.)
Squelch Level
When the Squelch Level key is
pressed, the transceiver enters the
mode allowing a user to change the
Squelch Level. (Refer to 1.6 Squelch
Level on page 3.)
Squelch Off
When the Squelch Off key is pressed,
the transceiver unmutes and received
audio can be heard. (Refer to 16.6
Squelch Off on page 58.)
Function Name Description
Squelch Off
Momentary
When the Squelch Off Momentary key
is pressed and held, the transceiver
unmutes and received audio can be
heard. (Refer to 16.6 Squelch Off on
page 58.)
Status
When the Status key is pressed, the
Status number can be entered directly
and the transceiver can send a Status
Message. (Refer to 20.3 Status
Message Function on page 86.)
Talk Around
When the Talk Around key is pressed,
the Talk Around function is enabled or
disabled. (Refer to 11 Talk Around on
page 34.)
Telephone
Disconnect
(TK-3173 only)
When the Telephone Disconnect key
is pressed, the phone line is
disconnected. (Refer to 15.4 Telephone
Interconnect on page 51.)
Transceiver
Password
When the Transceiver Password key is
pressed, the functions of the transceiver
are restricted and the transceiver enters
Password Entry Mode.
(Refer to 5.1 Transceiver Password on
page 24.)
VOX
When the VOX key is pressed, the
transceiver enters the mode allowing a
user to configure the VOX Gain Level.
When the VOX key is pressed and held,
VOX is enabled or disabled. (Refer to
25 VOX on page 122.)
Zone Down
When the Zone Down key is pressed, the
zone number decrements in steps of 1.
The zone is decremented in steps of 1
every 200 ms if the Zone Down key is
pressed or held for more than 1 second.
(Refer to 2.4 Changing the Zone on
page 9.)
Zone Up
When the Zone Up key is pressed, the
zone number increments in steps of 1.
The zone is incremented in steps of 1
every 200 ms if the Zone Up key is
pressed or held for more than 1 second.
(Refer to 2.4 Changing the Zone on
page 9.)
Function Name Description
To Next Page
Loading...
Need help?
General
