KERN ABS-N Series User Manual

ABS-N_ABJ-NM-BA-e-1715 93
17 Service, maintenance, disposal
17.1 Cleaning
Before cleaning, disconnect the appliance from the operating voltage.
Fig. 1: Clean the balance
1. Display
Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds.
2. Weighing
plate
Remove weighing plate, clean it wet and dry it before installation
3. casing,
housing,
case, box
Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds. Take
care that the device is not penetrated by fluids and polish it with
a dry soft cloth.
Loose residue sample/powder can be removed carefully with a
brush or manual vacuum cleaner.
Spilled weighing goods must be removed immediately.
4. Glass doors These can be removed as described in the following. After that
clean with a commercially available glass cleaner.
Handle glass doors with care.
Attention: Risk of breakage
Risk of cuts.
Keep away your hands/fingers from the running rail.

KERN ABS-N Series Specifications

General

Brand	KERN
Model	ABS-N Series
Category	Analytical Instruments
Language	English