98 PRS/PRJ/ARS/ARJ-BA-def-0622
3.4 Monitoring the test equipment
The metrology features of the balance and any possible available test weight must be
checked at regular intervals within the scope of quality assurance. For this purpose, the
user responsible must define a suitable interval as well as the nature and scope of this
check. Please see KERN’s home page (www.kern-sohn.com) for information regarding
the monitoring of balance test equipment and the test weights required for this. Test
weights and balances can be calibrated quickly and at a reasonable price in KERN’s
accredited DKD calibration laboratory (return to national standard).
4 Fundamental safety information
4.1 Observe the information in the operating instructions
Please read the operating instructions carefully before installing and commissioning, even
if you already have experience with KERN balances.
4.2 Staff training
The device may only be operated and maintained by trained members of staff.
5 Transport and storage
5.1 Acceptance check
Please check the packaging immediately upon delivery and check the device during
unpacking for any visible signs of external damage.
5.2 Packaging
Please retain all parts of the original packaging in case it should be necessary to return
items at any time.
Only the original packaging should be used for return consignments.
Before despatch, disconnect all attached cables and loose/movable parts.
Affix any intended transport security devices. Secure all parts, e.g. weighing plate, power
supply unit etc. to prevent slipping and damage.
To Next Page
Loading...
Need help?
General
