128 PRS/PRJ/ARS/ARJ-BA-def-0622
9 Working with the application menu
This chapter explains which working programs are contained within the balance and how
these are operated (see also Chapter 7.4 “Activating the two main menus” and Chapter
7.5 “How the menu control operates”).
If “PRINT” is operated in an application, a report is printed out which relates to the
application.
9.1 Structure of the application menu
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
The application menu is used to recall the working programmes of the balance and to
adapt them to the user's needs:
Main path Definable functions
SET APP.
Select application program:
SETUP
APPLICATION
Specify parameters for the working program as selected
under “Application”
SET STATISTICS
Statistics and store functions
SET CHECK +/-
Define nominal weight and limits for comparative
weighings
AUTO-START
ON/OFF
The selected application program can, if required, be loaded
automatically every time the balance is switched on
Printing conventions used in this document:
• The settings for the sub-menus programmed in the factory are printed in bold in these
operating instructions
• For a greater clarity, only that part of the menu tree which corresponds to this
application is shown with each application description.
• You will find the complete menu tree for the application menu in Chapter 15
“Application menu tree”.
• Explanations of the menu functions are printed in italics.
To Next Page
Loading...
Need help?
General
