100 PRS/PRJ/ARS/ARJ-BA-def-0622
6.3 Installation
The balance consists of the balance body (1), the scale pan holder (4) and the pan (5),
which, depending on the model, may be square (fig. 1, right) or round (fig. 1, left).
Depending on the model (see Chapter 1 “Technical Data”) the balance additionally has a
simple windshield (fig. 1, right) or a windshield with sliding doors (fig. 1, left) (2) and/or a
protective ring (3).
Fig. 1 Your balance
Use the foot screws to level the balance until the air bubble is in the prescribed circle in
the spirit level.
To Next Page
Loading...
Need help?
General
