PRS/PRJ/ARS/ARJ-BA-def-0622 159
13.1.3 Set Weighing mode: Auto-Standby
The Auto-Standby mode turns off the balance automatically, if:
• the balance is tared off and has shown “Zero” for at least 5 minutes,
• the balance has received no remote control command via the interface for at least 5
minutes,
• the automatic zero correction “Auto-Zero” is activated.
These are the options for re-start the balance after it has been switched off by automatic
Auto-Standby:
• Briefly depress any key
• Put a weight on the scale
• Give a remote control command via the interface
13.1.4 Set Weighing mode: Auto-Zero
If the automatic zero correction “Auto-Zero” is activated, the balance always gives a
stable zero (e.g. even with room temperature fluctuations).
To Next Page
Need help?
General
