POWER STEERING PRECAUTIONS
tb3O510A
(1) Power Steering Handle
1. The power steering function is acti-
vated only while the engine is run-
ning. However, the steering wheel
becomes slightly difcult when the
engine is running at a low speed.
The steering wheel can be operat-
ed but becomes very difcult when
the engine is stopped.
2. If you operate the steering wheel
with the tractor loaded, using an
implement or loader, the steering
wheel operation can be somewhat
difcult. Operate the steering while
tractor is in motion.
3. When a loader is mounted, adjust
the air pressure of the front wheel
to its maximum specification and
mount weight or implement on the
3 point hitch of the tractor, and re-
move the front weight to make the
front and rear balance more stable
for safe working.
4. When turning the steering wheel to
its end, the operating sound of the
safety valve (relief valve) can be
heard. Do not continuous to oper-
ate the steering wheel to a maxi-
mum right or left turn when you
hear the relief valve continually.
(OK for a short period of time). The
temperature of the hydraulic fluid
may rise, causing malfunctions.
The power steering system in this
tractor is a non-load reaction, full
hydraulic type.
The full hydraulic system means
that power necessary for power
steering is transferred by hydrau-
lic fluid only and therefore me-
chanical devices, such as racks
and pinions, are not installed
to the tractor. This function pre-
vents the steering wheel from
returning to its original position
by the resistance applied to the
front wheels which are hydrauli-
cally, not mechanically, linked to
the steering wheel. Therefore,
the angle of the KIOTI emblem
on the center of the steering
wheel may differ occasionally,
which is normal.
NOTE
To Next Page
Loading...
Need help?
General
