For detailed information, refer to
“Maintenance interval” in chapter 7.
PRE-OPERATION
CHECK ITEM
Walk around inspection.
Check the engine oil level.
Check the transmission oil level
.
Check the coolant level.
Clean the grill and radiator screen.
Check the air cleaner lter.
Check the brake pedal.
Check all dash gauges and indicators.
Check head lights, tail lights, and
all working lights.
Check accessible wiring harness
for any damage.
Check the seat belt and ROPS for
damage.
Check all danger and warning labels.
Check fuel level.
Check all danger and warning decals.
Visually check tire inflation and
wheel bolt tightening.
It is a good practice to know the con-
dition of your tractor before you start
it. You should do a routine check be-
fore each use.
Stop the tractor on level ground,
stop the engine, and apply the
parking brake before checking
or repairing it.
Refer to “Daily inspection” in
the section “Service” for fuel
replenishment.
Read information titled as
“Dange r”, “War ning”, and
“Caution” thoroughly for safe
operation.
CAUTION