(1) Belt Tension Pulley
(A) Adjusting Belt Tension (B) Pull
ADJUSTING FAN BELT TENSION (V)
In order to extend the fan belt’s life-
time, the tension of the belt should
be correctly adjusted if it slips. The
belt tension should be inspected
regularly according to the following
procedure:
tb2O706A
CHECKING INJECTION NOZZLE
AND FUEL INJECTION PUMP
The injection nozzle and injection
pump can be inspected only by a
qualified service personnel. For
detailed information, contact your
KIOTI Dealer.
Modifying sealed parts in the
fuel system, such as the flow
limit bolt and engine rpm limit
bolt, is strictly prohibited by
the emission regulations. If
such regulations are not fol-
lowed, it will not be covered by
warrant and will void any war-
ranty.
IMPORTANT
1. Stop the engine and apply the
parking brake.
2. Open the hood and loosen the lock
nut on the inside of the belt tension
pulley.
3. To secure the bolt, loosen the inner
nut on the inside of the tensioner;
then, turn the outer tensioner nut
in the clockwise direction.
To Next Page
Loading...
Need help?
General
