(1) PTO Shift Lever
This lever is to shift the PTO speed
as follows:
Rear position (A): Connecting only
to rear PTO
Middle position (B): Connecting
rear and middle PTO
Front position (C): Connecting only
to middle PTO
PTO SHIFT LEVER
TB3O432A
PTO SWITCH (ON / OFF)
The PTO switch is used to supply
power from the tractor to the imple-
ment.
Make sure to put this switch into the
“OFF” position before starting the en-
gine. Otherwise, the engine cannot
be started.
To activate the PTO, press and turn
the switch clockwise. To deactivate it,
press the switch once.
CAUTION
To avoid personal injury and ac-
cident:
B e f o r e d i s a s s e m b l i n g o r
clea n ing the P TO sy stem,
make sure that the PTO switch
is in the “OFF” position, the
engine is stopped, an d all
parts are stopped.
Always keep the PTO driving
part clean. Also, check the
PTO cover is closed while PTO
is in operation.
Disengage the PTO while driv-
ing the tractor on the public
road.
Be car efu l n ot to get you r
hand, foot, cloth, or hair into
any driving part while the PTO
is in operation. You can be se-
verely injured.
Make sure that no one is around
the tractor and implement while
the PTO is in operation.
•
•
•
•