- 30 -
4.3 Hydraulic Unit
The standard tractor has the hydraulic control systems
as below. Therefore, use the most appropriate system
for the implement you are using.
3-Point Hitch Control System
(1) Position Control
(2) Draft Control
(3) Mixed Control
Remote Hydraulic Control System
IMPORTANT :
• Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold,
the hydraulic system may be damaged.
• If noises are heard when implements is lifting after
the hydraulic control lever has been activated, the
hydraulic mechanism is not adjusted properly. Un-
less corrected, the unit will be damaged. Contact
your KIOTI Dealer for adjustment.
3-Point Hitch control system
Position Control
This will control the working depth of 3-point imple-
ments regardless of the amount of pull required. Place
the draft control lever in the lowest position and set
the implement working depth with the position control
lever.
623O420A
To Next Page
Loading...
Need help?
General
