- 37 -
6. Wheels, Tires and Tread
When working the fields where plants are in rows, it is
necessary to change the wheel tread so that the tires
would not pass over the plants. It is also necessary to
widen wheel tread to decrease danger when working
on slopes or hills, or when doing trailer work, etc.
• Never operate tractor with a loose rim,
wheel, or axle
• Always tighten nuts to the specified
torque.
• Check all of them frequently and keep
them tight.
WARNING
IMPORTANT:
• Follow same checking procedure when tractor is
first used.
• To decrease the wheel tread danger when working
on slopes or hills, or when working with trailer, etc.
Do not use tires larger than specified.
6.1 Tread-front
Front axle is not adjustable. Check and tighten as in-
structed.
IMPORTANT :
• Always attach tires as shown in the right-side draw-
ings.
• If not attached as illustrated, transmission parts may
be damaged.
• After changing wheel, nuts should be torqued to
57.2~66.5ft-lbs(77.5~90.1 N-m, 7.9~9.2kgf-m)
• Do not use tires larger than specified.
WARNING
623O603A
623O601A
623O602A
To Next Page
Loading...
Need help?
General
