Kohler Command Pro ECV860 User Manual

Maintenance
319 690 01 Rev. -- KohlerEngines.com
MAINTENANCE INSTRUCTIONS
WARNING
Before working on engine or equipment, disable engine as
follows: 1) Disconnect spark plug lead(s). 2) Disconnect
negative (–) battery cable from battery.
Accidental Starts can cause severe injury or
death.
Disconnect and ground spark plug lead(s)
before servicing.
Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair
establishment or individual; however, warranty repairs must be performed by a Kohler authorized dealer.
MAINTENANCE SCHEDULE
Every 100 Hours or Annually¹
● Change oil. Oil fi lter is recommended. Lubrication System
● Remove cooling shrouds and clean cooling areas. Air Cleaner/Intake
Every 150 Hours¹
● Check air cleaner element. Air Cleaner/Intake
● Replace unique Electronic Fuel Injection (EFI) fuel fi lter.
● Check oil cooler fi ns, clean as necessary (if equipped). Lubrication System
Every 200 Hours
● Change oil fi lter. Lubrication System
Every 300 Hours
● Replace air cleaner element and check inner element (if equipped). Air Cleaner/Intake
Every 500 Hours or Annually¹
● Replace spark plugs and set gap. Electrical System
Every 600 Hours
● Replace air cleaner inner element (if equipped). Air Cleaner/Intake
Every 600 Hours
2
● Have valve lash checked/adjusted.
1
Perform these procedures more frequently under severe, dusty, dirty conditions.
2
Have a Kohler authorized dealer perform this service.
REPAIRS/SERVICE PARTS
Kohler genuine service parts can be purchased from Kohler authorized dealers. To fi nd a local Kohler authorized
dealer visit KohlerEngines.com or call 1-800-544-2444 (U.S. and Canada).

Kohler Command Pro ECV860 Specifications

General

Brand	Kohler
Model	Command Pro ECV860
Category	Engine
Language	English