TP-7006 2/21 7Introduction
Introduction
This manual provides operation instructions for the
OnCue
R
Plus Generator Management System. OnCue
Plus is a cloud- based application that allows you to
remotely monitor your generator set using a web
browser or mobile application on a smart phone or
tablet.
OnCue Plus applies to Kohlerr Residential and Light
Commercial generator sets equipped with the following
controllers:
D RDC/DC
D RDC2/DC2
D VSC
Note: The RDC2, DC2, and VSC controllers require an
activation code, which is included with the OnCue
Plus kit provided with the generator set.
Note: The RDC and DC controllers must be equipped
with the Ethernet option board kit GM62465-KP1.
Contact your Kohler authorized distributor or
dealer for more information.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
List of Related Literature
Figure 1 lists related literature.
Literature Type Part Number
OnCue Plus Specification Sheet G6-179
OnCue Plus Technical manual TP-7007
Ethernet Option Board Installation
Instructions (RDC/DC only)
TT-1566
USB Utility Instructions TT-1636
Figure 1 Related Literature
To Next Page
Loading...
Need help?
General
