The aftertreatment devices regeneration pilot lamp lights up
during regeneration of the exhaust gas aftertreatment devices.
It goes out when the regeneration is completed.
REMARK
The lighting cycle becomes shorter when the ambient tempera-
ture is lower or working load is smaller.
For the procedures of the regeneration disable, see “PROCE-
DURE FOR AFTERTREATMENT DEVICES REGENERATION
DISABLE SETTING (3-133)”.
AFTERTREATMENT DEVICES REGENERATION DISABLE PILOT LAMP
Aftertreatment devices regeneration disable pilot lamp lights up
when the aftertreatment devices are set not to be regenerated.
REMARK
Even if the aftertreatment devices regeneration is disabled,
when the manual stationary regeneration is necessary, the
KDPF soot accumulation caution lamp lights up. If the KDPF
soot accumulation caution lamp lights up, cancel the regenera-
tion disable setting and perform the manual stationary regener-
ation.
For the procedures of cancellation of the regeneration disable
setting, and setting of the manual stationary regeneration, see
“PROCEDURE FOR CANCEL OF AFTERTREATMENT DEVI-
CES REGENERATION DISABLE SETTING (3-135)” and PRO-
CEDURE FOR MANUAL STATIONARY REGENERATION
(3-130).
SECONDARY STEERING SYSTEM PILOT LAMP
The secondary steering pilot lamp lights up while the secon-
dary steering is in operation.
SHIFT INDICATOR
This indicator shows the transmission shift range (gear shift).
OPERATION EXPLANATION OF COMPONENTS
3-37
To Next Page
Loading...
Need help?
General
