(B) Press the front of the pedal
STORAGE POSTURE WHEN LEAVING MACHINE
NOTICE
When leaving the operator's compartment, set the machine
in the posture shown in the figure for reasons of safety.
1. When leaving the machine for a long time see "LONG
TERM STORAGE" for instructions on correct preparation
of machine for long term storage.
2. When leaving the machine for a short time.
LIFTING
Recommended posture during lifting operations is with adjust
cylinder fully retracted.
WARNING
• Do not operate the adjust cylinder during lift opera-
tions as work equipment may move suddenly and
cause serious damage.
• When the second boom adjust cylinder is extended,
the bucket or attachment can hit the operator cab or
chassis.
• Operate work equipment slowly and carefully to avoid
any injury and damage.
2-PIECE BOOM ATTACHMENTS AND OPTIONS
6-16
To Next Page
Loading...
Need help?
General
