Konica Minolta bizhub 284e User Manual

Fax
5
5-26 bizhub 554e/454e/364e/284e/224e
5.3
Frequently Asked Questions Chapter 5
How to set
1 Tap [Utility], then select [Administrator Settings].
2 Enter the password, then tap [OK].
3 Select [Fax Settings] - [Function Settings] - [Forward TX Setting].
4 Select [Yes] and configure the respective items for forwarding faxes.
5 Tap [OK].
Tips
- If [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Receiving Line Setup] is set to
[ON] while multiple lines are used, you can specify whether to use the Forward TX function for each line.
Settings Description
[Output Method] To have forwarded faxes printed out on this machine, select [Forward &
Print]. To have faxes printed out on this machine only in the case forward-
ing has failed, select [Forward & Print (If TX Fails)].
[Forward Dest.] Enter the fax number of the forwarding destination. You can also specify a
computer or E-mail address for the forwarding destination by tapping [Se-
lect from Address Book] and selecting it from registered one-touch desti-
nations.
[Select Line] When multiple lines are used, select a line used to send a fax.

Konica Minolta bizhub 284e Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Capacity	3, 650 sheets
Max Paper Size	A3
Duplex Printing	Yes
Memory	2 GB
Hard Drive	250 GB
Operating System Compatibility	Windows, Mac, Linux
Print Speed	28 ppm
Copy Speed	28 cpm
Connectivity	USB, Ethernet