Copy
5
5-34 bizhub 554e/454e/364e/284e/224e
5.4
Frequently Asked Questions Chapter 5
5.4.3 Q3. Can I check the finish before starting copying?
A3. Yes, you can check the finish by outputting a proof copy.
You check either by referring to a preview image or by outputting just one copy for checking how it is actually
finished.
Using a proof copy helps preventing copy errors.
How to set: Checking the finish with a preview image
1 Load the original.
2 Tap [Copy].
3 Specify copy settings and the number of copies as necessary, then tap [Preview].
4 Tap [Preview on Screen], select the original loading direction, then tap [Start].
5 Tap [View Page].
The screen used to change the preview display appears.
% To continue scanning originals, load the original, then tap [Start Scan].
% To start copying, tap [Print] or press the Start key.
% If a multi-page original has been scanned, you can flick the preview image to feed pages forward or
backward.
6 Check the preview display, and rotate the image or change settings as needed.
% To continue scanning originals, load the original, then tap [Start Scan].
% To enlarge the preview image, double-tap the image.
% To enlarge or reduce the preview image, pinch-in or pinch-out the image.
To Next Page
Loading...
Need help?
General
