Authentication Manager
3
Authentication Manager 3-111
2
Reminder
To select all the functions in the list, click [Select All].
The "Save to external memory" check box is cleared by default. Select
this check box, if necessary.
2
Note
This setting applies only to devices that support public users. On devices
that do not support public users, you cannot configure the function
permission for public users using Authentication Manager.
3.11.3 SSFC Authentication Settings
Various settings for FeliCa SSFC authentication can be specified. Settings
for the following parameters can be specified.
2
Reminder
It is necessary for this item to be specified only when using the SSFC
card for IC card authentication. If not using the SSFC card, it is not
necessary to specify it.
% Specify the necessary settings, and then click the [Apply] button.
– To clear the entered information, click the [Clear] button.
The Object Device Setting page appears again.
Function Details
Room Number Type in the room number of the device.
Floor Number Type in the floor number of the device.
Building Number Type in the building number of the device.
Area Number Type in the area number of the device.
Security Level Type in the security level of the device.
Company Code Type in the company code of the device.
Company Identification Code (1 -
10)
Type in the company identification code (1 - 10) of the de-
vice.
To Next Page
Loading...
Need help?
General
