Authentication Manager
3
Authentication Manager 3-133
3.15 Biometric information
Settings for the following parameters can be specified on the Biometric
Information page.
2
Reminder
This page is displayed when the license for Gateway for Biometric
Authentication Manager is registered.
Create biometric information using Registration Tool, and then register it
using the import function of Authentication Manager.
For details, refer to the Help for Registration Tool and "Importing from a
file" on page 3-41.
When logged on as a group manager, only information for managed
groups and users can be edited or deleted. For details on group manager
settings, refer to "Specifying a group manager" on page 3-145.
2
Reminder
When conducting the biometric "1:N" authentication, authentication is
carried out between the users of the unit numbers registered with
Registration Tool. To authenticate, enter the number that matches the
unit number registered on the device panel of the device to conduct
biometric authentication. If a different number is entered, it will not be
authenticated.
A default unit number can be specified for each device. For details, refer
to "Editing device settings" on page 3-104.
Up to 500 users can be registered in a unit.
Biometric information registered using AU-101 cannot be authenticated
with the device with AU-102 connected. Also, biometric information
registered using AU-102 cannot be authenticated with the device with
AU-101 connected.
Function Details
[Change Biometric Unit No.] but-
ton
Click this button to change the biometric unit No. of a user.
[Delete Biometric Information]
button
Click this button to delete the biometric information of a us-
er.
Search Condition Specify the condition to narrow down users to be displayed
in the list.
Select All/Uncheck All button Click this button to select or uncheck all displayed settings.
To Next Page
Loading...
Need help?
General
