Konica Minolta bizhub C224e User Manual

Authentication Manager
3
Authentication Manager 3-131
Editing a template
The information of a registered IC card information template can be viewed
and changed.
% Specify the settings for the template information to be changed, and
then click the [Apply] button.
– The detailed settings vary depending on the type of the data
specified in a template.
– If "Bit" is selected for [Data Type], for settings, refer to "Registering
IC card information (when the data type is "Bit")" on page 3-131.
– If "Byte" is selected for [Data Type], for settings, refer to
"Registering IC card information (when the data type is "Byte")" on
page 3-132.
– To clear the entered information, click the [Clear] button.
Registering IC card information (when the data type is "Bit")
If the type of the data specified in a template is "Bit", configure the following
settings.
Template Name Type in the template name.
Data Type Select the data type of an IC card.
Scanning Start Position (Bit) Specify the card ID starting position.
ID Length (Bit) Specify the length of a card ID.
Conversion method of Card ID Select a method to convert a card ID.
• "Decimal": Converts a card ID to a decimal value.
• "Hexadecimal": Converts a card ID to a hexadecimal
value.
Minimum Number of Digits (Pad-
ding)
Specify the minimum number of digits for card ID.

Konica Minolta bizhub C224e Specifications

General

Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Printing Technology	Laser
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Memory	2 GB
Hard Drive	250 GB
Print Speed	22 ppm
Copy Speed	22 cpm (black and color)
Paper Capacity	1, 150 sheets
Connectivity	USB, Ethernet
Display	9-inch color touchscreen
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux
Warm-up Time	20 seconds