Authentication Manager
3
Authentication Manager 3-3
3.1.3 Specifying display settings for the user list
The items to be displayed or hidden in the user list can be selected. Settings
can be specified for the following parameters.
- User Name
- User Group Name
- Description
The user is deleted via an external server.
User Name Displays the user name.
User Group Name Displays the name of the group to belong to.
Description Displays the description of the user.
External Server Name Displays the name of the registered external server.
Account Name Displays the account track information of the user. If you do
not synchronize the user and account when managing the
account, "Do Not Synchronize" is displayed. When you
synchronize them, the account name is displayed if the
name of the account that the user belongs to is specified.
"None" is displayed if no account name is specified.
E-mail Address Displays the e-mail address of the user.
Home Displays the address of the SMB server that is normally
used by the user.
2
Reminder
To use "Home" (send the scanned data to the
Home address) for the device, the following
conditions must be satisfied.
- The device supports the use of "Home".
- Active Directory is used to perform authenti-
cation of the external server.
If other than Active Directory is used for authen-
tication, "Home" cannot be used for the device.
Maximum Number of Box Displays the upper limit on the number of boxes that the
user can create. The upper limit of the user with this item
blank is not managed.
Apply Level Displays the access permission level for the address book.
Biometric Unit No. Displays the biometric unit No.
2
Reminder
This page is displayed when the license for
Gateway for Biometric Authentication Manager
is registered.
Function Description
To Next Page
Loading...
Need help?
General
