6-2-3 Introduction to the menu
This chapter will introduce the function and using introduction and hot key of every menu in the
PRINT MON.
The menu bar in the software includes five main menu from pulling down
The English letter behind the main menu is shortcut key corresponding to the menu, press Ctrl and
English letter at the same time will be OK.
6-3-2-1 JOB menu
There are four option in job menu, showing as following.
Using add job
、
delete job and print job can achieve add a new job file,delete a job and print job file.
Exit can achieve exit the software.
1. Add job
Open all of the file; extension name is
*.prn
、
*.prt
、
and other file whose file format must be same.
In the words box can choose file catalogue
、
name and so on. After setting, click "open"button;the
system will operate "opening file" put the file into job area.
6-2-3-2 "setting" menu
Setting menu include the order such as save
、
upload
、
storage setting into KONICA
、
upload
setting from KONICA and compile.
1
．
save
、
upload
Save order can achieve to save every option setting of software(including voltage of print
head,every calibration) as a configuration files
（
*.xml
）
;upload order can achieve upload
configuration files saved and upload the setting in configuration files into the software.
Note:upload setting will cover the previous setting.
2. Save setting to konica
、
upload setting from konica
The same with the above order. The difference is that when storage and upload, the media of
storage in configuration files is the machine. That also means save setting to the machine order is
put setting save to the machine; upload setting from the machine also put setting upload to
software from the machine.
3. compile
Compile order can achieve the setting of compile software. Showing as following picture:
To Next Page
Loading...
Need help?
General
