Tools menu includes update
、
pass word
、
testing page
、
calibration guide
、
hardware setting
、
time
setting
1.update:this option is special for engineers using
2.Pass word: input the pass word of the machine
3.Testing page:print bidirection calibration.
4.Calibration guide: the calibration of the machine,next chapter will offer detailed information
5.Time setting:this option is for adjusting print head voltage,showing as following:
When install the new machine and reset up software.please input the voltage to the base voltage
form according to the print head. After inputting the voltage, click apply to main board. Please
don't correct voltage casually.
6-3 Hardware Setting
The hardware setting provided the flexible system use, you can set the different printer head
type; the color number and the print head group number in the software according to your
machine without different hardware and control software .
Step
StepStep
Step one
one one
one：
：：
：Printer Hardware setting
Printer Hardware settingPrinter Hardware setting
Printer Hardware setting
After the software installed, first step must do hardware setting, otherwise the machine
can’t start, enter the setting menu hardware setting function and setting the printer
hardware option
：
Step two
：
：：
：
Select Encoder
To Next Page
Loading...
Need help?
General
