KTM 150 SX 2017 - All 250 SX Models; XC Us

To Next Page

To Previous Page

21 TECHNICAL DATA 107

Sixth gear 22:24

Ignition Contactless controlled fully electronic ignition with digital igni-

tion adjustment, type Kokusan

Spark plug NGK BR9 ECMVX

Spark plug electrode gap 0.60 mm (0.0236 in)

Starting aid Kick starter

21.1.3 All 250 SX models

Design 1-cylinder 2-stroke engine, water-cooled, with reed intake and

exhaust control

Displacement 249 cm³ (15.19 cu in)

Stroke 72 mm (2.83 in)

Hole 66.4 mm (2.614 in)

Exhaust valve, beginning of adjustment 5,125 rpm

Crankshaft bearing 1 grooved ball bearing/1 roller bearing

Conrod bearing Needle bearing

Piston pin bearing Needle bearing

Piston Cast aluminum

Piston rings 2 half keystone rings

X distance (upper edge of piston to upper edge of cylinder) 0… 0.10 mm (0… 0.0039 in)

Z distance (height of control flap) 49 mm (1.93 in)

Primary transmission 26:73

Clutch Multidisc clutch in oil bath/hydraulically activated

Transmission 5-gear, claw shifted

Transmission ratio

First gear 14:28

Second gear 16:26

Third gear 18:24

Fourth gear 21:24

Fifth gear 22:21

Ignition system Contactless controlled, fully electronic ignition with digital igni-