KTM 150 SX 2017 User Manual

11 SERVICE WORK ON THE CHASSIS 51
F00027-10
–
Remove nut

and pull out the swingarm pivot.
– Push the swingarm back and secure it against falling over.
F00029-10
–
Hold the shock absorber and remove screw

.
F00030-01
– Remove the shock absorber carefully at the bottom.
11.19 Installing the shock absorber
F00030-02
Main work
– Carefully position the shock absorber into the vehicle from the bottom.
F00029-11
–
Mount and tighten screw

.
Guideline
Screw, top shock absorber M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™
F00035-10
– Position the swingarm and mount the swingarm pivot.
Info
Pay attention to flat area

.
–
Mount and tighten nut

.
Guideline
Nut, swingarm pivot M16x1.5 100 Nm
(73.8 lbf ft)

KTM 150 SX 2017 Specifications

General

Brand	KTM
Model	150 SX 2017
Category	Motorcycle
Language	English