20 CLEANING, CARE 194
Paint cleaner and polish for high-gloss and matte finishes, bare metal and plastic
surfaces ( p. 218)
– Oil the ignition/steering lock, tank lock, and seat lock.
Universal oil spray ( p. 218)
20.2 Checks and maintenance steps for winter operation
Info
If you use the motorcycle in winter, you must expect salt on the roads. You should therefore take precautions against aggressive
road salt.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance the corrosive effects of
salt.
401060-01
– Clean the motorcycle. ( p. 192)
– Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly wash the brake calipers and brake
linings with cold water and dry carefully. This should be done after the parts are
cooled down and while they are installed.
After riding on salted roads, thoroughly wash the motorcycle with cold water and
dry it well.
– Treat the engine, the swingarm, and all other bare or galvanized parts (except brake
discs) with a wax-based corrosion inhibitor.
Info
Corrosion inhibitor must not come into contact with the brake discs. This would
severely lower the braking effect.
To Next Page
Loading...
Need help?
General
