23 TECHNICAL DATA 200
23.1 Engine
Design 2-cylinder 4-stroke Otto engine, 75° V arrangement, water-cooled
Displacement 1,195 cm³ (72.92 cu in)
Stroke 69 mm (2.72 in)
Bore 105 mm (4.13 in)
Compression ratio 12.5:1
Idle speed 1,300… 1,500 rpm
Control DOHC, 4 valves per cylinder, chain-driven
Valve - valve stem diameter
Intake 42 mm (1.65 in)
Exhaust 34 mm (1.34 in)
Valve clearance
Exhaust at: 20 °C (68 °F) 0.25… 0.30 mm (0.0098… 0.0118 in)
Intake at: 20 °C (68 °F) 0.10… 0.15 mm (0.0039… 0.0059 in)
Crankshaft bearing Sleeve bearing
Conrod bearing Sleeve bearing
Piston Forged light alloy
Piston ring 1 upper compression (rectangular) ring, 1 lower compression ring,
1 oil scraper ring
Engine lubrication Dry sump lubrication system with three rotor pumps
Primary transmission 40:76
Clutch Antihopping clutch in oil bath/hydraulically operated
Transmission 6-speed claw gears
Transmission ratio
To Next Page
Loading...
Need help?
General
