15 WHEELS, TIRES 139
15.1 Removing the front wheel x
Preparatory work
(Option: Center stand)
– Raise the vehicle with the center stand. ( p. 102)
S00362-10
Main work
– Place a load on the rear of the vehicle.
The front wheel is not in contact with the ground.
–
Remove screw
1
and pull wheel speed sensor
2
out of the hole.
S00363-10
–
Remove screws
3
from both brake calipers.
– Press back the brake linings with a light lateral tilting of the brake calipers on the brake
disc. Pull the brake calipers carefully back from the brake discs and hang them to one
side.
Info
Do not pull the hand brake lever when the brake caliper has been removed.
To Next Page
Loading...
Need help?
General
