16 ELECTRICAL SYSTEM 163
S00376-10
–
Position rear fairing
2
.
–
Mount and tighten screws
1
.
Guideline
Screw, cover part M5x12 3.5 Nm
(2.58 lbf ft)
Finishing work
– Mount the driver's seat. ( p. 105)
– Mount the passenger seat. ( p. 104)
– Set the time and date.
16.6 Changing the fuses in the fuse box
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the passenger seat. ( p. 103)
To Next Page
Loading...
Need help?
General
