14 WHEELS, TIRES 90
400602-10
– Check the front and rear tires for cuts, run-in objects, and other damage.
» If the tire exhibits cuts, run-in objects, or other damage:
– Change the tire.
– Check the depth of the tread.
Info
Note local national regulations concerning the minimum tread depth.
Minimum tread depth ≥ 2 mm (≥ 0.08 in)
» If the tread depth is less than the minimum permissible depth:
– Change the tire.
– Check the tire age.
Info
The tire's date of manufacture is usually part of the tire markings and is
indicated by the last four digits of the DOT marking. The first two digits indi-
cate the week of manufacture and the last two digits the year of manufac-
ture.
KTM recommends that the tires be changed after 5 years at the latest,
regardless of the actual state of wear.
» If the tire is older than five years:
– Change the tire.
14.6 Checking the tire air pressure
Info
Low tire air pressure leads to abnormal wear and overheating of the tire.
Correct tire air pressure ensures optimal riding comfort and maximum tire service life.
400695-01
– Remove the protection cap.
– Check the tire air pressure when the tires are cold.
Tire air pressure off road
Front 1.0 bar (15 psi)
Rear 1.0 bar (15 psi)
Road tire pressure (All EXC‑F models)
Front 1.5 bar (22 psi)
Rear 1.5 bar (22 psi)
» If the tire air pressure does not meet specifications:
– Correct the tire air pressure.
– Mount protection cap.
14.7 Checking spoke tension
Warning
Danger of accidents Instable handling due to incorrect spoke tension.
– Ensure that the spoke tension is correct. (Your authorized KTM workshop will be glad to help.)
Info
A loose spoke can cause wheel imbalance, which leads to more loose spokes in a short time.
If the spokes are too tight, they can break due to local overload.
Check the spoke tension regularly, especially on a new motorcycle.
To Next Page
Loading...
Need help?
General
