KTM 250 SX-F EU User Manual

TUNING THE CHASSIS 29
Subsequent work
–
Install the shock absorber. x ( p. 40)
– Install the main silencer. ( p. 43)
– Check the static sag of the shock absorber. ( p. 27)
– Check the riding sag of the shock absorber. ( p. 27)
– Adjust the rebound damping of the shock absorber. ( p. 26)
– Remove the motorcycle from the lift stand. ( p. 32)
9.11Checking the basic setting of the fork
Info
For various reasons, no exact riding sag can be determined for the forks.
401000-01
– As with the shock absorber, smaller differences in the rider's weight can be com-
pensated by the spring preload.
– However, if the fork is often overloaded (hard end stop on compression), harder
springs must be fit to avoid damage to the fork and frame.
9.12Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
101275-10
– Turn adjusting screws 1 clockwise all the way.
Info
Adjusting screws 1 are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
– Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping (All SX‑F EU models)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Compression damping (SX‑F USA)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Compression damping (XC‑F)
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

KTM 250 SX-F EU Specifications

General

Brand	KTM
Model	250 SX-F EU
Category	Motorcycle
Language	English