SERVICE WORK ON THE CHASSIS 32
10.1Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
100913-01
– Raise the motorcycle at the frame underneath the engine.
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
Lift stand (54829055000)
10.2Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
100950-10
(All SX‑F models)
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, insert plug-in stand 1 into the left side of the wheel
spindle.
Info
Remove the plug-in stand before starting on a trip.
101084-10
(XC‑F)
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, press side stand 1 to the ground with your foot and
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
10.3Bleeding the fork legs
Preliminary work
– Raise the motorcycle with the lift stand. ( p. 32)
101276-10
Main work
– Remove bleeder screws 1 briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten bleeder screws.
Follow-up work
– Remove the motorcycle from the lift stand. ( p. 32)
To Next Page
Loading...
Need help?
General
