3 WORK
26
3.12 Mounting the seat
H02218-11
– Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
– Make sure the seat is locked in correctly.
S03480-10
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
3.13 Disconnecting the negative cable of the 12-V battery
Preparatory work
– Remove the seat. ( p. 25)
R01414-10
Main work
–
Disconnect negative cable
1
of the 12-V battery.