KTM 85 SX 2022 User Manual

SERVICE WORK ON THE CHASSIS 11
47
V00873-10
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.
11.6 Installing the fork legs
H02312-11
–
Position the fork legs.
Air bleeder screw
1
of the right fork leg is positioned to
the front.
Valve
A
of the left fork leg faces the front.
Info
The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
V00873-11
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp
M8 17 Nm (12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp
M8 15 Nm (11.1 lbf ft)
H00935-15
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change front wheel bearing.
–
Clean and grease shaft seal rings
4
and contact surfaces
B
of the spacers.
Long-life grease ( p. 125)
– Insert the spacers.
S04277-10
– Clean and grease the wheel spindle.
Long-life grease ( p. 125)
–
Position the front wheel.
– Insert the wheel spindle.
–
Mount and tighten screw
5
.
Guideline
Screw, front wheel
spindle
M20x1.5 35 Nm (25.8 lbf ft)

KTM 85 SX 2022 Specifications

General

Brand	KTM
Model	85 SX 2022
Category	Motorcycle
Language	English