EasyManuals Logo
Home>KTM>Motorcycle>990 SMT

KTM 990 SMT User Manual

KTM 990 SMT
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
TUNING THE ENGINE 162
15.2Adjusting the play in the throttle cable x
B00666-10
Move the handlebar to the straight-ahead position.
Use the KTM diagnostics tool to set the throttle stepper motor to the basic position.
Push back sleeve .
Loosen lock nut .
Set the play in the throttle cable by turning adjusting screw .
Guideline
Play in throttle cable 3… 5 mm (0.12… 0.2 in)
Tighten lock nut .
Slide on sleeves .
Check the throttle grip for ease of movement.
15.3Ignition curve plug-in connector
B00667-01
The plug-in connection is located under the seat in front of the tail light.
By disconnecting the plug-in connector, the ignition curve for fuel with an octane rating
below 95 (ROZ 95/RON 95/PON 91) is activated. While the engine will have a slightly
lower power output, this setting prevents engine damage by hindering spark knocking due
to poor fuel quality.
Possible states
Plug-in connector disconnected Fuel with an octane rating of 80 to 94 (RON) can be
used for one tank full.
Plug-in connector connected Fuel with an octane rating of 95 or higher can be used.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 990 SMT and is the answer not in the manual?

KTM 990 SMT Specifications

General IconGeneral
BrandKTM
Model990 SMT
CategoryMotorcycle
LanguageEnglish

Related product manuals