KTM 990 SMT User Manual

SERVICE WORK ON THE CHASSIS 84
10.7Mounting the seat
B00624-10
– Position front recesses  of the seat on the oval head screws of the fuel tank, lower
the rear and simultaneously push it forward. Both lugs  must hook into the frame and
locking bolt  must be inserted into the lock housing.
The seat engages with an audible click.
– Finally, check that the seat is correctly mounted.
10.8Mounting the helmet lock on the vehicle
Warning
Danger of accidents Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.
– Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-
ing out.
B00688-10
– Remove the seat. ( p. 83)
– Position the steel cable from the tool set with one loop on the lug .
Steel cable (60012015000)
– Guide the steel cable through the helmet opening.
– Then position the free loop of the steel cable on the lug.
– Position the helmet carefully on the side of the vehicle.
– Mount the seat. ( p. 84)

KTM 990 SMT Specifications

General

Brand	KTM
Model	990 SMT
Category	Motorcycle
Language	English