CONTROLS 44
5.26Setting the temperature units
Condition
The motorcycle is stationary.
400893-14
– Switch on the ignition by turning the ignition key to the ON position.
– Press the MODE button repeatedly until the ambient temperature is active.
– Keep the MODE button pressed until the display mode changes from °C to °F or from °F
to °C.
5.27Combination instrument - warning of slippery roads
400894-10
The ice symbol lights up to indicate an increased danger of slippery roads.
The ice symbol appears in the display when the ambient temperature drops below the
specified value.
Temperature 3 °C (37 °F)
The ice symbol goes out in the display when the ambient temperature rises above the
specified value again.
Temperature 4 °C (39 °F)
To Next Page
Loading...
Need help?
General
