(1) Hour meter
11. Diesel-particulate-filter (DPF)
regeneration indicator
As PM (particulate-matter) build up inside the DPF, the
DPF regeneration cycle starts automatically to burn
away PM. During DPF regeneration, the DPF-
regeneration-indicator lights up and stays on and the
beep tone keeps sounding to warn the operator.
(1) DPF regeneration indicator
12. Engine rev up indicator
If the engine rpm is too low to start regeneration, the
DPF-regeneration-indicator lights up and starts
blinking, and the engine-rev-up-indicator lights up. In
case that the DPF-regeneration-indicator lights up and
starts blinking, rev up the engine until the engine-rev-
up-indicator goes out, the DPF regeneration will
automatically start.
(1) Engine rev up indicator
13. Air cleaner warning indicator
If the air cleaner is clogged, the air cleaner warning
indicator on the instrument panel will light up.
If this should happen at high engine rpm, stop the
engine and clean the air cleaner element.
(See Checking the air cleaner element on page
90,Cleaning the air cleaner element on page 90 and
Cleaning the evacuator valve on page 91.)
(1) Air cleaner warning indicator
INSTRUMENT PANEL AND SWITCH INSTRUMENT PANEL