Kubota SSV65 User Manual

LIFTING
LIFTING THE MACHINE
DANGER
To avoid personal injury or death:
• The instructions for safe lifting are described in
the Lifting the machine section. Read
instructions in the Lifting the machine section
carefully before lifting the machine. Make sure
that the operating personnel read the operator's
manual carefully before lifting.
WARNING
To avoid personal injury or death:
• Do not use damaged chains, hooks and lifting
devices.
The loader can be lifted with the Single-Point Lift that is
available as a kit from your KUBOTA dealer.
The Single-Point Lift, supplied by KUBOTA, is designed
to lift and support the KUBOTA loader without affecting
rollover and falling object protection features of the
operator cab.
(1) Lifting eye
IMPORTANT :
• Follow the procedure so the unit cannot roll.
1. Select a firm, level surface.
2. Lower the working equipment to the ground.
3. Stop the engine.
4. Set the arm rest to the locked position.
5. Apply the parking brake switch.
• Do not lift loads that exceed the maximum rated
capacity of the hoist and attaching hardware.
• Do not enter and do not allow others to enter
the working area under the suspended load,
and do not move the load over people. Only
move the load in an area where the equilibrium
can be maintained.
• Always inspect the attaching hardware,
including chains, hooks and lifting devices
before each use. Do not use any worn or
damaged attaching hardware or if the safety
latch is missing.
• Do not use attaching hardware, including
chains and hooks, in extreme temperature or
other environmental conditions that exceed the
manufacturer's specifications.
• Disengagement of the load can cause severe
injury or death. The use of a hook with a safety
latch does not preclude inadvertent detachment
of a slack sling load from the hook. Visually
verify proper engagement of hook or shackle in
all instances.
• Comply with all federal, state, and local
regulations and safety standards before lifting
the machine.
• Make sure that the lifting chains and hooks are
strong enough to withstand the load being
lifted.
• Be sure that the hooks have safety latch.
• Before lifting the machine, be sure that
attachments are properly attached.
Model
name
SSV65 SSV75
Model
type
Open Cab
Closed
Cab
Open Cab
Closed
Cab
Weight
*1
3220 kg 3320 kg 3740 kg 3840 kg
*1 SSL weight with standard (non-hydraulic) bucket
Procedure for lifting
1. Lift slowly and vertically.
2. Move the machine slowly into place.
LIFTING LIFTING THE MACHINE
70
SSV65,SSV75

Kubota SSV65 Specifications

General

Brand	Kubota
Model	SSV65
Category	Utility Vehicle
Language	English