Kubota SSV65 User Manual

Blower switch
The air flow (fan speed) equips three levels. At the [3]
position, you can obtain the largest air flow.
1. Set the blower switch at the desired position to
obtain the desired air flow (fan speed).
OPERATING THE CONTROL
PANEL
(1) Air-conditioner switch with
indicator light
(2) Temperature control dial
(3) Blower switch
Heating air
1. Adjust the blower switch [1], [2], and [3] and the
temperature-control-dial to achieve the desired
temperature level.
NOTE :
• In summer, when the heater is not used, keep
the temperature-control-dial at the cool
(leftmost) position. Otherwise, hot air will raise
the temperature in the cab.
Dehumidifying-heating
1. Press and turn on the air-conditioner-switch.
2. Turn the blower switch on [1], [2], or [3].
3. Adjust the temperature-control-dial to the cool
(leftmost) or an intermediate position to achieve the
desired temperature level.
NOTE :
• Be sure to close the door while the air-
conditioner is on.
Cooling
1. Press and turn on the air-conditioner-switch.
2. Turn the blower switch on [1], [2], or [3].
3. Adjust the temperature-control-dial to the cool
(leftmost) or an intermediate position to achieve the
desired temperature level.
NOTE :
• Be sure to close the door while the air-
conditioner is on.
Defrosting or demisting
To defrost or demist the windshield, take the following
steps.
1. Open the front-air-outlet and direct it to the
windshield.
2. Set the blower switch to the [3] position and set the
temperature-control-dial to [warm] (rightmost)
position.
OPERATING THE CONTROL PANEL AIR CONDITIONER
SSV65,SSV75
49

Kubota SSV65 Specifications

General

Brand	Kubota
Model	SSV65
Category	Utility Vehicle
Language	English