2.3 How to use the armrest
1. Move the armrests to the raised position to lock out
the hydraulic and electric systems.
(1) Armrest (A) Raise
NOTE :
• When the armrests are moved to the raised
position, the parking brake will engage and
the hydraulic and operation system will be
locked.
Move the armrests to the lowered position
and push the hydraulic-unlock-switch in
order to activate the hydraulic controls.
• When you start the engine, disengage the
hydraulic lock so that the hydraulic controls
are activated.
If the armrests are raised and then lowered
during the operation, you must disengage
the hydraulic lock so that the hydraulic
controls are activated.
3. Driving
WARNING
To avoid personal injury or death:
• Before starting the engine, make sure that no
one is near the machine.
IMPORTANT :
• When the left control (traveling) lever is in
neutral position, make sure that the machine
does not creep forward or backward. If the
machine does not remain stationary with the left
control (traveling) lever in neutral position,
consult your local Kubota dealer.
3.1 Traveling forward and backward
The control lever is on the left side in front of the seat.
Move the lever smoothly.
Avoid sudden starting and stopping.
To move forward
1. Push the left-control-lever (traveling lever) forward.
(1) Left control lever (traveling
lever)
(A) Push
(B) Forward
To move backward
1. Pull the left-control-lever (traveling lever) backward.
OPERATION OF THE MACHINE OPERATION
To Next Page
Loading...
Need help?
General
