NOTE :
• To stop the lift arm operation, return the right-
control-lever (front-operating-lever) to the
neutral position.
6. Operating the bucket
WARNING
To avoid personal injury or death:
• Do not exceed the rated operating capacity of
the unit. If loads exceed the rated operating
capacity, the unit can experience a hydraulic
imbalance when half or medium "lift arms raise"
and "bucket roll back" or "auxiliary hydraulic
control" commands are input together, which
can result in the lift arms lowering slowly. If you
begin to experience a hydraulic imbalance,
either place the lift arms control in neutral or
input full raise control, and lift arms lowering
will cease.
To roll the bucket back
1. Tilt the right-control-lever (front-operating-lever) to
the left.
(1) Right control lever (front op-
erating lever)
(A) Tilt
(B) Roll back
To dump the bucket
1. Tilt the right-control-lever (front-operating-lever) to
the right.
(1) Right control lever (front op-
erating lever)
(A) Tilt
(B) Dump
NOTE :
• To stop the bucket operation, return the right-
control-lever (front-operating-lever) to the
neutral position.
OPERATION OPERATION OF THE MACHINE