2M2/2M3
1-4-8
1-4-3 Image formation problems
If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
(2) No image
appears (entirely
black).
(3) Part of image is
missing.
(4)
Gray background. (5) White streaks
are printed verti-
cally.
See page 1-4-9 See page 1-4-9 See page 1-4-10 See page 1-4-10 See page 1-4-11
(6) Black streaks
are printed verti-
cally.
(7) White or black
streaks are
printed horizon-
tally.
(8) Spots are
printed.
(9) Printing incom-
plete or out of
position
(10)Paper is wrin-
kled.
See page 1-4-11 See page 1-4-11 See page 1-4-12 See page 1-4-12 See page 1-4-12
(11) Offset occurs. (12)Fusing is loose. (13)Faint or blurred
printing.
(14)Dirt on the top edge or back of the
paper.
See page 1-4-13 See page 1-4-13 See page 1-4-13 See page 1-4-14
(15)Spots in the printed objects.
See page 1-4-14