Kyocera FS-1350DN User Guide

4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
Basic Paper Settings
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Destination
This setting specifies which output tray is used for the print job output.
Orientation
This setting specifies the paper orientation of the print job. If Rotated is
selected, the print job orientation is rotated 180 degrees.
KX DRIVER
4-1

Kyocera FS-1350DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Processor model	PowerPC–440F5
Maximum internal memory	1152 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	54 dB
Power supply type	AC 220 - 240 V, 50/60 Hz
Capacity cartridge	7200 sheets
Standard media sizes	(105 x 148 - 216 x 297 mm)
Power consumption (active)	484 W
Compliance industry standards	TUV/GS, CE
Number of print cartridges	1
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum print size	216 x 356 mm
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power consumption (standby)	12 W
Power consumption (PowerSave)	7.1 W
Display	LCD

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 267 mm